InSinkErator Sink Stopper - STP Series
InSinkErator Sink Stopper - STP Series is rated
out of
5 by
34.
Product #: 0000000028812
$7.89 - $19.79
Specifications
- Replacement part for use with all InSinkErator manufactured disposers
- Closes tightly for use as a conventional stopper
- Weight: Approximately: .06 to .16 pounds depending on selected size
- Shipping Dimensions: Approximately 6.5 x 5 x 2.9 inches to 6.5 x 5 x 3.6 inches depending on size selected.
Reviews
Rated 1 out of
5
by
Blabla from
Very difficult to remove when sink is full of water
Unit seals well once you put it in, but the knob is too small to get a good grip on it to remove it. Knob shape and size needs to be improved so that you can get a better grip with your fingers to remove once water is in the sink.
J.L.
Date published: 2016-11-06
Rated 5 out of
5
by
Cajun from
Nothing better than orignal
I bought an after market stopper at one of the big chain hardware stores but could not get a correct fit, the water would eventually leak out. It was made specifically for Insinkerator models. I finally ordered direct from Insinkerator and got a quality fit each time I have used the product. There is nothing better than the original product.
Date published: 2016-07-11
Rated 5 out of
5
by
Homer from
Perfect fit
This replaces our original stopper which had the rubber outer edge damaged. This unit arrived promptly, fit perfectly and does just what it is supposed to do: hold water in the sink.
Thanks
Date published: 2016-04-20
Rated 5 out of
5
by
Cactus1 from
Exactly what I needed.
Very easy to order from your website, fair price and excellent service.
Date published: 2016-03-10
Rated 5 out of
5
by
MoMoRR from
It pays to replace with Orginal Equipment Manufacter (OEM) parts
The sink stopper fit absolutely perfect. Other manufacturers of replacement plastic sink stoppers did not have a very good fit/seal and had extremely high prices compared to the Insinkerator part. Easy ordering from the website, low price and fast delivery. Great savings of time and money.
Date published: 2016-02-12
Rated 5 out of
5
by
Snow from
Extremely pleased
The product was exactly what I needed and the prompt service was unbelievable!
Date published: 2016-02-01
Rated 3 out of
5
by
SPC123 from
Not representative of the Insinkerator brand...
I bought the 'Brushed Stainless' version of this stopper. My sink is 'brushed stainless', my faucet is 'brushed stainless', my soap dispenser, etc. Everything in my kitchen. All of these items have a nice, somewhat matte stainless finish.
1.) This stopper looks like you can actually see 'brush marks' in the steel. Very weird and kind of cheap-looking compared to everything else in my kitchen.
2.) Otherwise, I would say the quality is pretty good - feels solid.
3.) However, why not make this thing look a little nicer? You sell these really nice, premium disposers - but they're under the sink where no one sees them. Why not spend a little more time making a really nice, excellent quality stopper?
4.) Also you kind of missed the boat by not putting your brand name on the item. Again - no one sees the disposer, everyone sees the stopper(!) That's where your branding should be and that's where you should go to town making it look nice. The one thing the consumer looks at every day(!)
Thanks - hope to see a nicer stopper some day soon...
Date published: 2015-10-12
Rated 5 out of
5
by
Algarmond from
Perfect little guy to plug a hole with in your sink
I'd say it's about as perfect as a plug can be - easy to install, use, and keep clean.
Looks good and our previous one lasted ten plus years - if we hadn't inadvertently recycled it out with the old sink, we never would have had to replace it.
I only gave three stars for innovation, because, well, let's face it - there's nothing innovative about plugging a hole in sink is there. :-)
Date published: 2015-09-24
Recently Viewed
top