- Depth : 0.62
- Model No : 852272
- ProductID : 0000100456711
- Restricted Locations : This item cannot be shipped to: AK CA HI
- SkuId : 100456711
- Width : 3.75
Hardware Essentials Cup Pulls are designed for by-pass, pocket and sliding doors. Can be installed without fasteners. Installation demands that a 3/4" diameter x 5/16" deep hole is bored to allow for flush mounting. Pull is held in place by friction. Tools required: pencil, power drill, hammer, wood chisel, and a 2-1/8" drill bit.
- PRIMARY USE: Designed to provide a recessed handhold for bi-pass, pocket, slab, or any sliding door for opening & closing
- INSTALLATION: For use on Doors 3/4 in. to 1 3/4 in. thick. Ensure that your installation location is 3/8 in. deep. Further directions on packaging.
- This pull features a push in design that does not require fasteners.
- SEVERAL FINISHES: Available in a variety of finishes, allowing you to find the exact product you need.
- Weight: Approximately: 0.4 to 0.55 pounds depending on selected size
- Shipping Dimensions: Approximately: 3.76 x 0.47 inches to 3.75 x 0.62 inches depending on size selected.
