Bilge Pump Installation Kit

The Attwood Bilge Pump Installation Kit gives you everything you need to install a manual bilge pump with 3/4 inch or 1-1/8 inch I.D. hose outlet.

• Model # 4116-5
• Complete kit to install manual bilge pump with 0.75 in or 1.125 in hose outlet
• 2-way on/off switch with bezel plate
• 0.75 in ID x 5 ft corrugated hose
• Thru-hull fitting for 0.75 in ID hose
• 2 snap-it hose clamps
• 2-conductor 16-gauge wire, 20 ft long
• In-line fuse holder with 2-amp fuse
• Weight: Approximately: .48 pounds
• Shipping Dimensions: Approximately 16 x 10 x 2.6 inches.
• This product cannot be shipped to: CA