- Box Contents : Includes 1 natural gas heater, 2 angle brackets for ceiling mount, 1 natural gas to liquid propane conversion kit, one 0.5 in gas connection
- Depth : 15.2
- Manufacturers Guarantee : No
- Manufacturers Warranty : Yes
- Manufacturers Warranty Details : 3-year limited manufacturer’s warranty on all parts and burners 10-year limited manufacturer’s warranty on any defects in the heat exchanger
- Model No : F260550
- ProductID : 0000000233305
- Restricted Locations : This item cannot be shipped to: AK CA HI
- SkuId : 100458727
- Width : 29.3
Consumers across the country are turning their garages and barns into heated work spaces that can be used comfortably 12 months per year. Mr. Heater Big Maxx unit heaters use a built-in electric high-velocity fan to pull cool air into the rear of the heater and over a heat exchanger, forcing air into the surrounding area. This heater requires 115 volt AC power and can be vented vertically or horizontally - please check local codes and restrictions. This heater can operate using propane (LP) or natural gas (NG). Proper venting is required and is sold separately. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections, installation is a cinch.
- Looking for a way to turn your garage, small shop, or barn into a year round workspace then the 50,000 BTU Natural Gas / Propane Unit Heater is the way for you to go as a safe, quiet, and reliable heat source
- Requires natural gas or propane to run and includes one 1/2 in. gas connection
- Will heat an area of approximately 1,250 sq ft
- Durable Spark Ignition and robust factory standard self -diagnostic control module
- Requires 115V AC power with Category 1 vertical venting or Category 3 horizontal venting
- Low Profile Design so heater can be installed in low-ceiling buildings with 1 in clearance easily
- Minimum of 8 ft clearance from floor to base of heater is required
- Built-in electric high-velocity fan pulls cool air into the rear of the heater, across a heat exchanger, and into surrounding areas
- 50,000 BTUs per hr output
- Includes 1 natural gas heater, 2 angle brackets for ceiling mount, I natural gas to liquid propane conversion kit, one 0.5 in gas connection and requires all venting (sold separately) and 1 thermostat (sold separately)
- Easy assembly required using supplied brackets, external access to power, and thermostat connections
- Item assembled measures 25 in L x 25.5 in W x 12 in H
- 3-year limited manufacturer's warranty on all parts and burners
- 10-year limited manufacturer's warranty on any defects in the heat exchanger
- Weight: Approximately 70 pounds
- Shipping Dimensions: Approximately 29.3 x 26.3 x 15.2 inches.
