Online Item #:
The Pro Series Blade Boss System is a precision jig system that is used to re-sharpen the blades for the TTR0750-TTR2000 Pro Series Tenon Cutters and the TRH1000-TRH2000 Home Series Tenon Cutters. The kit is used with a drill press to put a factory-like edge on the blades. The jig will hold the blade at the factory ground angle of 30 degrees. With three multiple grit sanding sleeves going from coarse to fine, it will touch up, or completely re-sharpen the blades.
- 1 sanding drum with 1/4 in. shank
- 3 sanding sleeves - one 80 grit, one 120 grit & one 240 grit
- Allen wrench
- Weight: Approximately: 2 pounds
- Shipping Dimensions: Approximately 6 x 4 x 4 inches.
Tab 4 - Future Phase
Prefer to place your order by phone?
Reach us at 877-633-7456 M-F 7:00am - 6:00pm Central Standard Time.