The Halo H99TAT is a small aperture housing for PAR20 size lamps such as accent and task lighting. It is designed for use in non-insulated ceilings or for insulated ceilings, but insulation MUST be kept 3 inches from all sides of the housing. This is an Air-Tite model, made to prevent air flow between living spaces and unconditioned areas.

• 4 In. Air-Tite New Const. Non-IC Housing
• Mfr. item number - H99TAT
• For non-insulated ceilings, or if insulated, insulation is kept 3 inches from the housing
• Got Nail! bar hangers with precisely aligned, pre-installed nails
• Pass-N-Thru tool-less shortening of bar hangers for use in joist spans of less than 12 inches
• Slide-N-Side is pre-installed strain relief that eliminates purchase of addiitonal connectors
• Quick Connect pre-intalled wiring connectors included in junction box
• Integral incandescent thermal protector
• Air-Tite gasket prevent air flow between the attic and the living areas
• Galvanized steel frame, CRS housing
• Housing may be removed from frame for junction box access
• Weight: Approximately 2.19 pounds to 12 pounds depending on size selected.
• Shipping Dimensions: Approximately 16 x 9 x 7 inches to 24 x 18.25 x 6 inches depending on size selected.