• CPVC Cap
• Part numbers - 50155, 50157
• Slip
• Chlorinated polyvinyl chloride fitting
• Used to permanently or temporarily cap CPVC tubing
• Most often used with short lengths of CPVC tubing to fabricate air chambers in the system
• For potable hot & cold water distribution
• Used to run from the water meter to the fixtures
• Accepted by all major building codes
• Rated at 210 degrees F for water heater relief valve drain applications
• Solvent weld joints
• Made in the USA
• Weight: Approximately .06 pounds
• Shipping Dimensions: Approximately 1 x 1 x 1 inches.